舉報
手機瀏覽

NI數據采集卡NI USB-6212

價格

電議

型號

NI USB-6212

品牌

所在地

深圳市

更新時間

2023-03-02 08:46:03

瀏覽次數

次

產品描述

Product Family	多功能DAQ
Measurement Type	電壓相位差編碼
Form Factor	USB
Operating System / Target	Windows
RoHS Compliant	是
Isolation Type	None
模擬輸入
Single-Ended Channels	16
差分通道	8
模擬輸入分辨率	16 bits
*電壓范圍
Range	-10 V - 10 V
Accuracy	2.71 mV
Sensitivity	118 μV
Minimum Voltage Range
Range	-200 mV - 200 mV
Accuracy	0.089 mV
Sensitivity	5.2 μV
Number of Ranges	4
Simultaneous Sampling Simultaneous Sampling A property of a measurement system in which each input or output channel is digitized or updated at the same instant. You will need simultaneous sampling for applications where the time relationship between inputs is important, such as phase analysis of AC signals. Because channel-dedicated analog-to-digital converters (ADCs) are used to sample data simultaneously between inputs, the maximum sample rate is applicable to each channel and is not divided by the total number of channels. Devices that don’t have simultaneous sampling capabilities use multiplexing to connect each channel to its ADC. Interval scanning is a low-cost option to simulate simultaneous sampling for low-frequency signals such as temperature or pressure. This method scans the input channels at one interval and uses a second interval to determine the time before repeating the scan. The input channels are scanned within microseconds, creating the effect of simultaneously sampling the input channels.	No
板載內存	4095 樣本
模擬輸出
Number of Channels	2
Resolution	16 bits
Maximum Voltage Range
Range	-10 V - 10 V
Accuracy	3.512 mV
Minimum Voltage Range
Range	-10 V - 10 V
Accuracy	3.512 mV
Update Rate	250 kS / s
Current Drive Single	2 mA
Current Drive All	4 mA
Digital I / O
Bidirectional Channels	32
Input-Only Channels	0
Output-Only Channels	0
Timing	軟體
Logic Levels	TTL
Programmable Input Filters	否
Supports Programmable Power-Up States?	是
Digital Input
Input Type	汲極源電流
Maximum Voltage Range	0 V - 5.25 V
Digital Output
Output Type Current Flow A sinking device provides a path for the current to ground and is not responsible for powering the device. Terms used to describe sinking devices include NPN, Open Collector, Normally High, and IEC Negative Logic. A sourcing device provides the power or a positive potential. Sourcing devices ''push'' the current through the load. Terms used to describe sourcing devices include PNP, Open Emitter, Normally Low, and IEC Positive Logic. Relays are ified by their number of poles and number of throws. The pole of a relay is the terminal common to every path. Each position that the pole can connect to is called a throw. A relay can be made of n poles and m throws. For example, a single-pole single-throw relay (SPST) has one pole and one throw. · Form A relays are SPST with a default state of normally open.= · Form B relays are SPST with a default state of normally closed. · Form C relays are SPDT and break the connection with one throw before making contact with the other (break-before-make)..	汲極源電流
Current Drive Single	16 mA
Current Drive All	50 mA
Maximum Voltage Range	0 V - 3.8 V
Counters / Timers
Watchdog Timer Digital I/O Watchdogs NI digital I/O watchdogs are an innovative technology that provides protection against a wide variety of fault conditions: ·Computer crash - total OS crash ·Application crash - software application ceases to respond ·Driver crash - device driver ceases to respond ·PCI bus failure - communications cease to respond With watchdogs, the digital outputs go to a safe state when a fault condition is detected and the watchdog timer expires for safe recovery. Watchdogs are important whenever the module is connected to actuators such as pumps, valves, motors, and relays. The digital I/O module monitors the software application and, if it fails to respond within the time limit, automatically sets the output lines to a user-defined safe state. The module remains in the watchdog state until the watchdog timer is disarmed by the application and new I/O values are written, the device is reset, or the computer is restarted.	否
Counters	2
Buffered Operations	是
Debouncing / Glitch Removal	是
Max Source Frequency	80 MHz
Pulse Generation	是
Size	32 bits
Time Stability	50 ppm
Logic Levels	TTL
Timing / Triggering / Synchronization
Triggering	數位
Physical Specifications
Length	16.9 cm
Width	9.4 cm
Height	3.1 cm
I / O Connector	螺絲端子
USB Power	總線供電

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，儀器儀表交易網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。